[c-nsp] fabricpath and vPC+

[quinn snyder]

http://www.cisco.com/en/US/prod/collateral/switches/ps9441/ps9402/white_paper_c07-728188.pdf

take it with a grain of salt — as some of it is very marketecture related.

q.
--
quinn snyder
snyderq at gmail.com


On 13-Nov-13, at 10:23 , Arne Larsen / Region Nordjylland <arla at rn.dk> wrote:

> Hi all
> 
> What is the correct setup when one is using fabricpath and vPC+
> If 2 5k are direct connected with 2 10G fabricpath interfaces, should these 2 be a channel group
> or doesn't it really matter, because of the equal cost routing in isis
> 
> /Arne
> 
> _______________________________________________
> cisco-nsp mailing list  cisco-nsp at puck.nether.net
> https://puck.nether.net/mailman/listinfo/cisco-nsp
> archive at http://puck.nether.net/pipermail/cisco-nsp/