[c-nsp] ASR 901 EoMPLS

Pshem Kowalczyk pshem.k at gmail.com
Mon Nov 18 13:43:15 EST 2013


Hi,

The only way we could get the L2 forwarding going on ASR901 was using
a single service instance with encapsulation default (this only works
in newest software):

interface GigabitEthernet0/8
 no ip address
 negotiation auto
 no keepalive
 service instance 1 ethernet
  encapsulation default
  l2protocol forward
  xconnect 10.123.129.3 34322 encapsulation mpls
   mtu 9000


kind regards
Pshem


On 19 November 2013 02:11, Fredrik Vöcks <fredrik.vocks at bredband2.se> wrote:
> Hi all,
>
> We are having a customer who says he can't forward BPDU packets over an
> portbased EoMPLS using an ASR 901.
>
> Is this something known or am I missing something? Relevant configuration;
>
> interface TenGigabitEthernet0/1
>  description c_customer433231
>  no keepalive
>  xconnect x.x.x.x 1730 encapsulation mpls
>
> /F
> _______________________________________________
> cisco-nsp mailing list  cisco-nsp at puck.nether.net
> https://puck.nether.net/mailman/listinfo/cisco-nsp
> archive at http://puck.nether.net/pipermail/cisco-nsp/



More information about the cisco-nsp mailing list