[c-nsp] ASR 901 EoMPLS

[Adam Vitkovsky]

Hi  folks
Is the 901 that different form 903
As on 903 it is possible to accomplish the below config on 15.3(2)S1a (03.09.01a.S)

adam
-----Original Message-----
From: cisco-nsp [mailto:cisco-nsp-bounces at puck.nether.net] On Behalf Of Pshem Kowalczyk
Sent: Monday, November 18, 2013 7:43 PM
To: Fredrik Vöcks
Cc: <cisco-nsp at puck.nether.net>
Subject: Re: [c-nsp] ASR 901 EoMPLS

Hi,

The only way we could get the L2 forwarding going on ASR901 was using a single service instance with encapsulation default (this only works in newest software):

interface GigabitEthernet0/8
 no ip address
 negotiation auto
 no keepalive
 service instance 1 ethernet
  encapsulation default
  l2protocol forward
  xconnect 10.123.129.3 34322 encapsulation mpls
   mtu 9000


kind regards
Pshem


On 19 November 2013 02:11, Fredrik Vöcks <fredrik.vocks at bredband2.se> wrote:
> Hi all,
>
> We are having a customer who says he can't forward BPDU packets over 
> an portbased EoMPLS using an ASR 901.
>
> Is this something known or am I missing something? Relevant 
> configuration;
>
> interface TenGigabitEthernet0/1
>  description c_customer433231
>  no keepalive
>  xconnect x.x.x.x 1730 encapsulation mpls
>
> /F
> _______________________________________________
> cisco-nsp mailing list  cisco-nsp at puck.nether.net 
> https://puck.nether.net/mailman/listinfo/cisco-nsp
> archive at http://puck.nether.net/pipermail/cisco-nsp/

_______________________________________________
cisco-nsp mailing list  cisco-nsp at puck.nether.net https://puck.nether.net/mailman/listinfo/cisco-nsp
archive at http://puck.nether.net/pipermail/cisco-nsp/