[c-nsp] ASR 901 EoMPLS

[Pshem Kowalczyk]

Hi,

I just realised that this feature is not in the official software.
We're running a pre-release 15.3.4 here (3.11 in XE speak), for our
metroE deployment.

kind regards
Pshem

On 19 November 2013 09:04, Fredrik Vöcks <fredrik.vocks at bredband2.se> wrote:
> Hi,
>
> Im trying to do this on Version 15.3(3)S but the xconnect is rejected if I
> enable l2protocol forward.
>
> Which version are you succesfully doing this on?
>
>
> (config-if-srv)# l2protocol forward
> (config-if-srv)#xconnect x.x.x.x 1730 encapsulation mpls
> Layer2 protocol tunnel/forward/peer configured. Command rejected
>
> /F
>
>
>
>
> On 18 November 2013 19:43, Pshem Kowalczyk <pshem.k at gmail.com> wrote:
>>
>> Hi,
>>
>> The only way we could get the L2 forwarding going on ASR901 was using
>> a single service instance with encapsulation default (this only works
>> in newest software):
>>
>> interface GigabitEthernet0/8
>>  no ip address
>>  negotiation auto
>>  no keepalive
>>  service instance 1 ethernet
>>   encapsulation default
>>   l2protocol forward
>>   xconnect 10.123.129.3 34322 encapsulation mpls
>>    mtu 9000
>>
>>
>> kind regards
>> Pshem
>>
>>
>> On 19 November 2013 02:11, Fredrik Vöcks <fredrik.vocks at bredband2.se>
>> wrote:
>> > Hi all,
>> >
>> > We are having a customer who says he can't forward BPDU packets over an
>> > portbased EoMPLS using an ASR 901.
>> >
>> > Is this something known or am I missing something? Relevant
>> > configuration;
>> >
>> > interface TenGigabitEthernet0/1
>> >  description c_customer433231
>> >  no keepalive
>> >  xconnect x.x.x.x 1730 encapsulation mpls
>> >
>> > /F
>> > _______________________________________________
>> > cisco-nsp mailing list  cisco-nsp at puck.nether.net
>> > https://puck.nether.net/mailman/listinfo/cisco-nsp
>> > archive at http://puck.nether.net/pipermail/cisco-nsp/
>
>