[c-nsp] Third party transceivers that fail only with new, NX-OS 6.2.2a on sup-2E

[Jeffrey G. Fitzwater]

Christina, are you running on sup-2E ?   We are running many non-CISCO transceivers on nexus 7k running 6.1.3 but when I did the upgrade to 6.2.2a NO GOOD.



We also ran across issue with 6.2.2a on sup-2E that you cannot overwrite slot0: file.   Delete but no overwrite.  TAC case open.

Jeff
On Nov 19, 2013, at 8:54 AM, Christina Klam <cklam at ias.edu> wrote:

> Jeff,
> 
> We have been running 6.2(2) since the summer.  In the last six months, I
> had to return some third-party "Cisco compatible" twinax cables because
> they were "Invalid" on our M2s.  And, I just had to swap out some
> official Cisco SFP-10G-LR because they were "version 1" which also do
> not work with our M2 cards.
> 
> As it has been awhile since we ran 6.1 so I do not know if the issue
> began with 6.2 or not.
> 
> I do not know if this helps. But, I feel better after venting. :-)
> -- 
> Christina Klam
> Network Engineer
> Institute for Advanced Study
> Email:  cklam at ias.edu
> 
> Einstein Drive          Telephone: 609-734-8154
> Princeton, NJ 08540     Fax:  609-951-4418
> _______________________________________________
> cisco-nsp mailing list  cisco-nsp at puck.nether.net
> https://puck.nether.net/mailman/listinfo/cisco-nsp
> archive at http://puck.nether.net/pipermail/cisco-nsp/