[c-nsp] ASR A9K-8T-L certain ports limited to 8 Gbps.

[Mark Tinka]

On Wednesday, November 20, 2013 01:15:36 AM McDonald 
Richards wrote:

> What framing mode are you running and what is the
> underlying transmission?
> 
> I have seen this before on 10G circuits running in wanphy
> mode and the only fix was to get better transmission
> (ie. not an STM-64c) and run lanphy :)

WAN-PHY could do this.

I always prefer LAN-PHY, particularly if you run the DWDM 
network over which it's provisioned. There really isn't much 
you gain during troubleshooting by having WAN-PHY, if you 
have access to the DWDM network. So don't take the bandwidth 
tax.

Mark.
-------------- next part --------------
A non-text attachment was scrubbed...
Name: signature.asc
Type: application/pgp-signature
Size: 836 bytes
Desc: This is a digitally signed message part.
URL: <https://puck.nether.net/pipermail/cisco-nsp/attachments/20131120/52ebf525/attachment.sig>