[c-nsp] IPv6 in the lab......

[CiscoNSP List]

....And you also may need to adjust sdm to support ipv6


> From: cisconsp_list at hotmail.com
> To: svoll.voip at gmail.com; cisco-nsp at puck.nether.net
> Date: Thu, 28 Nov 2013 08:20:35 +1100
> Subject: Re: [c-nsp] IPv6 in the lab......
> 
> Have you enabled ipv6 unicast-routing ?
> 
> > Date: Wed, 27 Nov 2013 10:06:51 -0800
> > From: svoll.voip at gmail.com
> > To: cisco-nsp at puck.nether.net
> > Subject: [c-nsp] IPv6 in the lab......
> > 
> > So I may be dense or something, but if I have two devices on a Vlan with
> > IPv6 addresses in the same network, why would I not be able to ping them?
> > 
> > Is there something I have to do on layer 2 switches in order to allow the
> > icmpv6 to flow?
> > 
> > Switches are 3560's and nexus 5500/2k's
> > 
> > TIA
> > 
> > Scott
> > _______________________________________________
> > cisco-nsp mailing list  cisco-nsp at puck.nether.net
> > https://puck.nether.net/mailman/listinfo/cisco-nsp
> > archive at http://puck.nether.net/pipermail/cisco-nsp/
>  		 	   		  
> _______________________________________________
> cisco-nsp mailing list  cisco-nsp at puck.nether.net
> https://puck.nether.net/mailman/listinfo/cisco-nsp
> archive at http://puck.nether.net/pipermail/cisco-nsp/