[c-nsp] SC to LC converter

[Jon Lewis]

That'd do.  The first fiber supplier I checked didn't have that in 
appropriate fiber.

On Tue, 15 Oct 2013, Andrew Miehs wrote:

> Why not just
>
> http://www.amazon.com/gp/aw/d/B002DG18MI ?
>
> But honestly - I would install a patch panel on either end and run proper fixed installation type fibre.
>
> Sent from a mobile device
>
>> On 15 Oct 2013, at 10:01, Jon Lewis <jlewis at lewis.org> wrote:
>>
>>> On Mon, 14 Oct 2013, Kenny Kant wrote:
>>>
>>> I have an older multi-mode fiber connection coming into our 7206VXR /
>>> NPE-G1 with a SC end.  We are moving this fiber to a new router which
>>> requires a LC/SFP.  Due to some other challenges I cannot have this cable
>>> re-run.    Can I get some recommendations for SC to LC conversion?  Any web
>>> links to what you have used in the past one be greatly appreciated.
>>
>> SC/LC patch cable and SC/SC coupler.  If you have the parts/tools to terminate your own fiber, you can make your own SC/LC jumper...but it's cheaper to just order them pre-made.
>>
>> http://www.fibercables.com/products/0-2m-0-66ft-multimode-duplex-fiber-optic-cable-62-5-125-lc-to-sc.html
>> http://www.fibercables.com/products/fiber-optic-adapter-sc-to-sc-multimode-duplex.html
>>
>> ----------------------------------------------------------------------
>> Jon Lewis, MCP :)           |  I route
>>                             |  therefore you are
>> _________ http://www.lewis.org/~jlewis/pgp for PGP public key_________
>> _______________________________________________
>> cisco-nsp mailing list  cisco-nsp at puck.nether.net
>> https://puck.nether.net/mailman/listinfo/cisco-nsp
>> archive at http://puck.nether.net/pipermail/cisco-nsp/
>

----------------------------------------------------------------------
  Jon Lewis, MCP :)           |  I route
                              |  therefore you are
_________ http://www.lewis.org/~jlewis/pgp for PGP public key_________