[c-nsp] SC to LC converter

Andrew Miehs andrew at 2sheds.de
Mon Oct 14 19:11:20 EDT 2013

Why not just

http://www.amazon.com/gp/aw/d/B002DG18MI ?

But honestly - I would install a patch panel on either end and run proper fixed installation type fibre.

Sent from a mobile device

> On 15 Oct 2013, at 10:01, Jon Lewis <jlewis at lewis.org> wrote:
>> On Mon, 14 Oct 2013, Kenny Kant wrote:
>> I have an older multi-mode fiber connection coming into our 7206VXR /
>> NPE-G1 with a SC end.  We are moving this fiber to a new router which
>> requires a LC/SFP.  Due to some other challenges I cannot have this cable
>> re-run.    Can I get some recommendations for SC to LC conversion?  Any web
>> links to what you have used in the past one be greatly appreciated.
> SC/LC patch cable and SC/SC coupler.  If you have the parts/tools to terminate your own fiber, you can make your own SC/LC jumper...but it's cheaper to just order them pre-made.
> http://www.fibercables.com/products/0-2m-0-66ft-multimode-duplex-fiber-optic-cable-62-5-125-lc-to-sc.html
> http://www.fibercables.com/products/fiber-optic-adapter-sc-to-sc-multimode-duplex.html
> ----------------------------------------------------------------------
> Jon Lewis, MCP :)           |  I route
>                             |  therefore you are
> _________ http://www.lewis.org/~jlewis/pgp for PGP public key_________
> _______________________________________________
> cisco-nsp mailing list  cisco-nsp at puck.nether.net
> https://puck.nether.net/mailman/listinfo/cisco-nsp
> archive at http://puck.nether.net/pipermail/cisco-nsp/

More information about the cisco-nsp mailing list