[c-nsp] Configuring Multiple Cisco Devices

[Ahmet Uncu]

Thanks for the reply's,
Lavojm,
I will run same command on each node, those nodes have same
Username/password combination

On 31 October 2013 14:59, Lasse Birnbaum Jensen <lasse at sdu.dk> wrote:
> Rancid to the rescue. Can run on mac or linux.
>
> Best regards
>
> Lasse Birnbaum Jensen
> Network administrator, IT-Service Infrastructure
> University of Southern Denmark
>
> Email: lasse at sdu.dk
> Phone: +45 6550 2873
> Mobile: +45 6011 2873
>
> On 31 Oct 2013, at 13:02 , Ahmet Uncu <uncuahmet at gmail.com> wrote:
>
>> Hello all,
>> I need to configure about 300 cisco routers/switches same time. Could
>> you offer me a free software that can do this?IT looks like ciscocmd
>> can do this, but it has lack of documentation since I am not familiar
>> with linux, I wasnt able to run this tool.
>> Thanks
>> _______________________________________________
>> cisco-nsp mailing list  cisco-nsp at puck.nether.net
>> https://puck.nether.net/mailman/listinfo/cisco-nsp
>> archive at http://puck.nether.net/pipermail/cisco-nsp/
>