[c-nsp] EIGRP Metric

[M K]

Hi allI have the below topology
R1 E1/0 - R5 F1/0
Its connected via a layer 2 switch , I have advertised Loopback interface on R1 (1.1.1.1)now , the route is installed in R5 routing tableMy concern is that E1/0 has a BW value of 10000 and delay of 1000 , F1/0 of R5 has BW value of 100000 and delay of 100When I checked the Metric of the route (FD) on R5 , all calculations were based on F1/0 values and the values of E1/0 were ignored , why?
Thanks