[c-nsp] EIGRP Metric

[M K]

Thanks for the great explanation

> Date: Mon, 2 Sep 2013 12:51:09 +0400
> From: iinfo83 at gmail.com
> To: gunner_200 at live.com
> CC: cisco-nsp at puck.nether.net
> Subject: Re: [c-nsp] EIGRP Metric
> 
> Because router calculates metrics from himself to destination , not from 
> neighbor to destination.
> this is Advertised distance , when R5 recieves routes from R1 with AD , 
> R5 will add its metrics to R1 which will be FD
> 
> On 09/02/2013 12:45 PM, M K wrote:
> > Hi allI have the below topology
> > R1 E1/0 - R5 F1/0
> > Its connected via a layer 2 switch , I have advertised Loopback interface on R1 (1.1.1.1)now , the route is installed in R5 routing tableMy concern is that E1/0 has a BW value of 10000 and delay of 1000 , F1/0 of R5 has BW value of 100000 and delay of 100When I checked the Metric of the route (FD) on R5 , all calculations were based on F1/0 values and the values of E1/0 were ignored , why?
> > Thanks 		 	   		
> > _______________________________________________
> > cisco-nsp mailing list  cisco-nsp at puck.nether.net
> > https://puck.nether.net/mailman/listinfo/cisco-nsp
> > archive at http://puck.nether.net/pipermail/cisco-nsp/
>