[c-nsp] Input Errors And CRC Errors

[A.L.M.Buxey at lboro.ac.uk]

Hi,

> Trying to diagnose a problem on a 6509 chasis, port showing input and CRC errors on one end of the link. The link is a Tengigabit
> I'me going to try the follwing:
> Change fibre

clean/check fibre first. ensure its the right type of fibre for the link
length and media converter type 

> Change Gbic, if errors are still showing try changing port.

yep.  only once you reach this stage should you start thinking about ASICs and ports - which
are documented in the technical specifications of the blades. do the quick simple stuff before
opening up technical docs ;-)

alan