[c-nsp] Input Errors And CRC Errors

[Harry Hambi]

Thanks.....does anyoane know how I would find the Port?Asics mappings?.


Rgds
Harry

Harry Hambi BEng(Hons)  MIET  Rsgb

-----Original Message-----
From: A.L.M.Buxey at lboro.ac.uk [mailto:A.L.M.Buxey at lboro.ac.uk]
Sent: 12 September 2013 11:57
To: Harry Hambi
Cc: 'cisco-nsp at puck.nether.net'
Subject: Re: [c-nsp] Input Errors And CRC Errors

Hi,

> Trying to diagnose a problem on a 6509 chasis, port showing input and
> CRC errors on one end of the link. The link is a Tengigabit I'me going to try the follwing:
> Change fibre

clean/check fibre first. ensure its the right type of fibre for the link length and media converter type

> Change Gbic, if errors are still showing try changing port.

yep.  only once you reach this stage should you start thinking about ASICs and ports - which are documented in the technical specifications of the blades. do the quick simple stuff before opening up technical docs ;-)

alan


-----------------------------
http://www.bbc.co.uk
This e-mail (and any attachments) is confidential and
may contain personal views which are not the views of the BBC unless specifically stated.
If you have received it in
error, please delete it from your system.
Do not use, copy or disclose the
information in any way nor act in reliance on it and notify the sender
immediately.
Please note that the BBC monitors e-mails
sent or received.
Further communication will signify your consent to
this.
-----------------------------