[c-nsp] policy map shape being "ignored"?

[CiscoNSP List]

Cheers Tony - We have a number of other shapers on portchan subints that are definitely working on the same 7200...if it was a portchan/subint issue(That the router didnt report), would have thought that all shapers would have been affected?


Date: Fri, 13 Sep 2013 01:50:51 -0700
From: td_miles at yahoo.com
Subject: Re: [c-nsp] policy map shape being "ignored"?
To: cisconsp_list at hotmail.com; cisco-nsp at puck.nether.net

My guess is that shapers not supported on port-channel interfaces. We've got a similar issue and it's on my to-do list to convert the port-channel back to a single interface to test and see if this is indeed the problem with the shaper (you've just reminded me I need to do this !).


regards,
Tony.


        From: CiscoNSP List <cisconsp_list at hotmail.com>
 To: "cisco-nsp at puck.nether.net" <cisco-nsp at puck.nether.net> 
 Sent: Friday, 13 September 2013 5:58 PM
 Subject: [c-nsp] policy map shape being "ignored"?
   
Hi Guys/Girls,

7200/G1, have other policy-maps/shaping working without issue, but the following one seems to be ignored?

policy-map 10M
 class class-default
    shape average 9800000 104000 0

interface Port-channel1.1019
 encapsulation dot1Q 1019
 ip address xxx.xxx.xxx.117 255.255.255.252
 service-policy output 10M


#sh policy-map int po1.1019
 Port-channel1.1019
  Service-policy output: 10M
    Class-map: class-default (match-any)
      1664453 packets, 1933030626 bytes
      30 second offered rate 55140000 bps,
 drop rate 0 bps
      Match: any
      Queueing
      queue limit 64 packets
      (queue depth/total drops/no-buffer drops) 0/0/0
      (pkts output/bytes output) 0/0
      shape (average) cir 9800000, bc 104000, be 0
      target shape rate 9800000

IOS bug? 


                           
_______________________________________________
cisco-nsp mailing list  cisco-nsp at puck.nether.net
https://puck.nether.net/mailman/listinfo/cisco-nsp
archive at http://puck.nether.net/pipermail/cisco-nsp/