[c-nsp] policy map shape being "ignored"?

[Pete Lumbis]

I can't explain why it works for some (sub) interfaces but it sounds like
shapers on port channels, on software routers (ISR/ISR-G2/7200s) isn't
fully implemented/supported. See CSCtx75955. From what I can dig up some of
the code is there and some isn't, so features are/will be hit or miss.
Sorry for the flaky answer




On Fri, Sep 13, 2013 at 3:58 AM, CiscoNSP List <cisconsp_list at hotmail.com>wrote:

> Hi Guys/Girls,
>
> 7200/G1, have other policy-maps/shaping working without issue, but the
> following one seems to be ignored?
>
> policy-map 10M
>  class class-default
>     shape average 9800000 104000 0
>
> interface Port-channel1.1019
>  encapsulation dot1Q 1019
>  ip address xxx.xxx.xxx.117 255.255.255.252
>  service-policy output 10M
>
>
> #sh policy-map int po1.1019
>  Port-channel1.1019
>   Service-policy output: 10M
>     Class-map: class-default (match-any)
>       1664453 packets, 1933030626 bytes
>       30 second offered rate 55140000 bps, drop rate 0 bps
>       Match: any
>       Queueing
>       queue limit 64 packets
>       (queue depth/total drops/no-buffer drops) 0/0/0
>       (pkts output/bytes output) 0/0
>       shape (average) cir 9800000, bc 104000, be 0
>       target shape rate 9800000
>
> IOS bug?
>
>
>
> _______________________________________________
> cisco-nsp mailing list  cisco-nsp at puck.nether.net
> https://puck.nether.net/mailman/listinfo/cisco-nsp
> archive at http://puck.nether.net/pipermail/cisco-nsp/
>