[c-nsp] A9K 40G & 100G

[Dmitry Kiselev]

As far as I hear from my CSE, tornado cards will work with older RSPs, but will have performance limitations due low speed fabric connections. Unable to check on my boxes - already upgraded

-- 
Dmitry Kiselev

> From: philxor at gmail.com
> Date: Thu, 19 Sep 2013 21:05:28 -0700
> To: jason at lixfeld.ca; cisco-nsp at puck.nether.net
> Subject: Re: [c-nsp] A9K 40G & 100G
> 
> The 9010 with the non-RSP440 is about 184G/slot using both fabrics.. I
> am not entirely sure the 100G cards work without the 440...
> 
> Phil From: Jason Lixfeld
> Sent: 9/19/2013 23:15
> To: cisco-nsp NSP
> Subject: [c-nsp] A9K 40G & 100G
> I'm wondering if anyone knows off the top of their head what the
> limitations are in terms of 40/100G LC support with RSP4.
> 
> I seem to remember reading something at some point saying if with an
> RSP4/8, two are required and both are required to run active/active.
> 
> Whereas with an RSP440, which has more fabric capacity, wouldn't
> require a second fabric active at the same time.