[c-nsp] A9K 40G & 100G

[Mohacsi Janos]

On Thu, 19 Sep 2013, Phil Bedard wrote:

> The 9010 with the non-RSP440 is about 184G/slot using both fabrics.. I
> am not entirely sure the 100G cards work without the 440...

It does, however in single RSP-4G  you are limited 93-95Gbps. No problem 
with redundant RSP-4G.
 	Regards,
 		Janos Mohacsi

>
> Phil From: Jason Lixfeld
> Sent: 9/19/2013 23:15
> To: cisco-nsp NSP
> Subject: [c-nsp] A9K 40G & 100G
> I'm wondering if anyone knows off the top of their head what the
> limitations are in terms of 40/100G LC support with RSP4.
>
> I seem to remember reading something at some point saying if with an
> RSP4/8, two are required and both are required to run active/active.
>
> Whereas with an RSP440, which has more fabric capacity, wouldn't
> require a second fabric active at the same time.
>
> Thanks!
>
> Sent from my iPhone
> _______________________________________________
> cisco-nsp mailing list  cisco-nsp at puck.nether.net
> https://puck.nether.net/mailman/listinfo/cisco-nsp
> archive at http://puck.nether.net/pipermail/cisco-nsp/
> _______________________________________________
> cisco-nsp mailing list  cisco-nsp at puck.nether.net
> https://puck.nether.net/mailman/listinfo/cisco-nsp
> archive at http://puck.nether.net/pipermail/cisco-nsp/
>