[c-nsp] A9K 40G & 100G

Phil Bedard philxor at gmail.com
Fri Sep 20 07:13:47 EDT 2013


  Typhoon are the newer cards.  They probably work but never tried since
its kind of a waste.
 ------------------------------
From: Dmitry Kiselev <dmitry at dmitry.net>
Sent: 9/20/2013 3:45
To: Phil Bedard <philxor at gmail.com>; Jason Lixfeld <jason at lixfeld.ca>;
cisco-nsp
NSP <cisco-nsp at puck.nether.net>
Subject: RE: [c-nsp] A9K 40G & 100G

 As far as I hear from my CSE, tornado cards will work with older RSPs, but
will have performance limitations due low speed fabric connections. Unable
to check on my boxes - already upgraded

-- 
Dmitry Kiselev

> From: philxor at gmail.com
> Date: Thu, 19 Sep 2013 21:05:28 -0700
> To: jason at lixfeld.ca; cisco-nsp at puck.nether.net
> Subject: Re: [c-nsp] A9K 40G & 100G
>
> The 9010 with the non-RSP440 is about 184G/slot using both fabrics.. I
> am not entirely sure the 100G cards work without the 440...
>
> Phil From: Jason Lixfeld
> Sent: 9/19/2013 23:15
> To: cisco-nsp NSP
> Subject: [c-nsp] A9K 40G & 100G
> I'm wondering if anyone knows off the top of their head what the
> limitations are in terms of 40/100G LC support with RSP4.
>
> I seem to remember reading something at some point saying if with an
> RSP4/8, two are required and both are required to run active/active.
>
> Whereas with an RSP440, which has more fabric capacity, wouldn't
> require a second fabric active at the same time.


More information about the cisco-nsp mailing list