[c-nsp] Problems with Netflow records creation on 6513/SUP2T-10G + WS-X6716-10GE/WS-F6K-DFC4-E

[Chris Welti]

Hi Chad,

Have you tried to reboot the whole chassis (not just failovers)?
We noticed that on one of our Sup2T ingress netflow suddenly stopped 
working on one interface (that was on a WS-X6908-10GE though) and 
nothing helped but a clean reboot.
Until about 15 days later when it stopped working again :)
That was on 15.1(1)SY1, we have now upgraded to 15.1(2)SY due to a 
severe BGP/RIB bug and are hoping that this doesn't happen again.
We love the stability of netflow on this platform ;-)

Regards,
Chris

Am 23.09.13 16:18, schrieb Chad Burnham:
> HI,
>
> We have an issue troubleshooting a lack of net flow records being created on any traffic that is ingresses into a port on a WS-X6716-10GE/WS-F6K-DFC4-E module/line card.
> Other line cards in this chassis create netflow records just fine.
>
> We have failed over the SUP and back - did not resolve the issue.  We are not certain that it has ever has worked.  The chassis has been rebooted after the card was installed when we upgraded to 15.1(1)SY1.
> TAC appears to be stumped on this one too.....
>
> Anyone else see this behavior before?
>
> We are on 15.1(1)SY1 on the SUPs, the FW on the line card is 12.2(18r)S1
>
> Thanks for any suggestions.
>
> Chad
>
>
> Chad D Burnham
> Director of Telecommunications
> University Technology Services - Network Services
> University of Denver
> 2100 S. High St. #112
> Denver, CO 80208
> Desk Phone: 303-871-4441
> Mobile Phone: 303-520-5657
>
>
> _______________________________________________
> cisco-nsp mailing list  cisco-nsp at puck.nether.net
> https://puck.nether.net/mailman/listinfo/cisco-nsp
> archive at http://puck.nether.net/pipermail/cisco-nsp/