[c-nsp] Service Instance

[Raheel Muhammad]

Yup xconnect worked under service instance.
On 22 Apr 2014 16:10, "Pete Lumbis" <alumbis at gmail.com> wrote:

> It's possible that Q-inQ mapping isn't supported but EVC style is. If you
> move it to EVC for the xconnect does it work?
>
>
> On Tue, Apr 22, 2014 at 8:42 AM, Raheel Muhammad <
> raheel.muhammad at gmail.com> wrote:
>
>> Hi,
>>
>> It works and why i wanted to do it is we already have lot of customers
>> configured as sub interfaces and this interface is the only option to
>> configure service instance and i was getting error on sub interface when i
>> was configuring xconnect on a QinQ sub interface.
>>
>> Thanks
>>
>>
>> On Tue, Apr 22, 2014 at 3:37 PM, Pete Lumbis <alumbis at gmail.com> wrote:
>>
>>> Probably not, but I'd ask why? EVC does the same thing as subs but with
>>> more flexibility?
>>>
>>>
>>>
>>> On Tue, Apr 22, 2014 at 4:28 AM, Raheel Muhammad <
>>> raheel.muhammad at gmail.com> wrote:
>>>
>>>> Hi,
>>>>
>>>> Might be a stupid question but have never done it, can we mix up service
>>>> instance and sub interface configuration on the same main interface.
>>>>
>>>> I am using SPA-5X1GE-V2 on 7600.
>>>>
>>>> Thanks
>>>> Raheel Muhammad
>>>> _______________________________________________
>>>> cisco-nsp mailing list  cisco-nsp at puck.nether.net
>>>> https://puck.nether.net/mailman/listinfo/cisco-nsp
>>>> archive at http://puck.nether.net/pipermail/cisco-nsp/
>>>>
>>>
>>>
>>
>