[c-nsp] EIGRP Authentication on IOS XR

[Pete Lumbis]

I think the next line after "authentication keychain...." is
"cryptographic-algorithm MD5"


On Tue, Apr 22, 2014 at 10:55 AM, M K <gunner_200 at live.com> wrote:

> Hi all
> I am facing an issue when configuring EIGRP authentication between IOS and
> IOS XR
>
> R1#sh run | sec key chain
> key chain KEY
>  key 1
>    key-string cisco
>
> R1#sh run int f0/0 | inc authen
>  ip authentication mode eigrp 1 md5
>  ip authentication key-chain eigrp 1 KEY
>
> RP/0/0/CPU0:XR1#sh run key chain
> Tue Apr 22 17:54:14.480 UTC
> key chain KEY
>  key 1
>   key-string password cisco
>
> router eigrp EIGRP_PROCESS
>  address-family ipv4
>   autonomous-system 1
>   interface Loopback0
>   !
>   interface GigabitEthernet0/0/0/0
>    authentication keychain KEY
>
> Under the interface GigabitEthernet0/0/0/0 located under the EIGRP process
> , I did not find an option for choosing MD5
>
> Any ideas?
>
> Thanks
>
>
>
> _______________________________________________
> cisco-nsp mailing list  cisco-nsp at puck.nether.net
> https://puck.nether.net/mailman/listinfo/cisco-nsp
> archive at http://puck.nether.net/pipermail/cisco-nsp/
>