[c-nsp] EIGRP Authentication on IOS XR

[M K]

No , the only option under the interface is authentication keychain command
The cryptographic-algorithm MD5 command is under the key chain command , I have tried it but did not work for me !

Date: Tue, 22 Apr 2014 13:16:14 -0400
Subject: Re: [c-nsp] EIGRP Authentication on IOS XR
From: alumbis at gmail.com
To: gunner_200 at live.com
CC: cisco-nsp at puck.nether.net

I think the next line after "authentication keychain...." is "cryptographic-algorithm MD5"


On Tue, Apr 22, 2014 at 10:55 AM, M K <gunner_200 at live.com> wrote:

Hi all

I am facing an issue when configuring EIGRP authentication between IOS and IOS XR



R1#sh run | sec key chain

key chain KEY

 key 1

   key-string cisco



R1#sh run int f0/0 | inc authen

 ip authentication mode eigrp 1 md5

 ip authentication key-chain eigrp 1 KEY



RP/0/0/CPU0:XR1#sh run key chain

Tue Apr 22 17:54:14.480 UTC

key chain KEY

 key 1

  key-string password cisco



router eigrp EIGRP_PROCESS

 address-family ipv4

  autonomous-system 1

  interface Loopback0

  !

  interface GigabitEthernet0/0/0/0

   authentication keychain KEY



Under the interface GigabitEthernet0/0/0/0 located under the EIGRP process , I did not find an option for choosing MD5



Any ideas?



Thanks







_______________________________________________

cisco-nsp mailing list  cisco-nsp at puck.nether.net

https://puck.nether.net/mailman/listinfo/cisco-nsp

archive at http://puck.nether.net/pipermail/cisco-nsp/