[c-nsp] 7600 Local Switching
James Bensley
jwbensley at gmail.com
Fri Aug 1 09:54:33 EDT 2014
Hi All,
I've not used the local switching feature on a 7600 before but I have
a need to use it now. It seems fairly strait forward and I've had a
read through this page,
http://www.cisco.com/c/en/us/td/docs/ios/12_0s/feature/guide/fslocal.html#wp1132065
I have configure the following command;
connect TEST-CONNECT TenGigabitEthernet2/1.104 GigabitEthernet1/18
interworking ethernet
PE251#show connection all
ID Name Segment 1 Segment 2 State
==================================================
3 TEST-CONNECT Te2/1.104 Gi1/18 UP
Te2/1.104 is facing an ASR9K dumping an MPLS pseudowire onto a
sub-interface on VLAN 104. I need to get that pseudowire to the device
on Gi1/18 :)
I can see with "show int te2/1.104" the incoming packet count is
incrementing (I'm sending a continuous ping over the pseudowire) but
the output packet count on gi1/18 isn't. I've never used this local
switching feature before, would could be wrong here?
Cheers,
James.
PE251#show module
Mod Ports Card Type Model Serial No.
--- ----- -------------------------------------- ------------------ -----------
1 48 CEF720 48 port 1000mb SFP WS-X6748-SFP SAL17120ZTX
2 4 CEF720 4 port 10-Gigabit Ethernet WS-X6704-10GE SAL17194DS5
5 5 Route Switch Processor 720 10GE (Activ RSP720-3CXL-10GE SAL1708ZMCF
Mod MAC addresses Hw Fw Sw Status
--- ---------------------------------- ----- ------------- ------------ -------
1 b0fa.eb83.0e00 to b0fa.eb83.0e2f 3.0 12.2(18r)S 15.3(1)S Ok
2 10f3.11b9.0300 to 10f3.11b9.0303 3.3 12.2(14r)S 15.3(1)S Ok
5 5057.a8b9.a1ec to 5057.a8b9.a1f3 1.2 12.2(33r)SR 15.3(1)S Ok
Mod Sub-Module Model Serial Hw Status
---- --------------------------- ------------------ ----------- ------- -------
1 Distributed Forwarding Card WS-F6700-DFC3CXL SAL17194M08 1.8 Ok
2 Distributed Forwarding Card WS-F6700-DFC3CXL SAL17142553 1.8 Ok
5 Policy Feature Card 3 7600-PFC3CXL-10GE SAL17194DRD 1.3 Ok
5 C7600 MSFC4 Daughterboard 7600-MSFC4 SAL17194BVW 7.0 Ok
Mod Online Diag Status
---- -------------------
1 Pass
2 Pass
5 Pass
PE251#show ver | i 76
Cisco IOS Software, c7600rsp72043_rp Software
(c7600rsp72043_rp-ADVIPSERVICESK9-M), Version 15.3(1)S2, RELEASE
SOFTWARE (fc2)
BOOTLDR: Cisco IOS Software, c7600rsp72043_rp Software
(c7600rsp72043_rp-ADVIPSERVICESK9-M), Version 15.3(1)S2, RELEASE
SOFTWARE (fc2)
System image file is
"sup-bootdisk:c7600rsp72043-advipservicesk9-mz.153-1.S2.bin"
Cisco CISCO7606-S (M8500) processor (revision 2.0) with
1900544K/131072K bytes of memory.
More information about the cisco-nsp
mailing list