[c-nsp] ME3600 config help, Q in Q

[james edwards]

The provider is creating a hub and spoke network with each customer
site on a separate c-vlan carried over vlan 1048 (p-vlan) I will be
one of the spokes to connect the other spokes to my network.

On 8/8/14, Darren O'Connor <darrenoc at outlook.com> wrote:
> What exactly are you trying to do? Looks like you're trying to L3 terminate
> one of the cvlans, but what are you going to do with the others? what's your
> end goal?
>
> Thanks
> Darren
> http://www.mellowd.co.uk/ccie
>
>
>
>> Date: Fri, 8 Aug 2014 10:17:11 -0600
>> From: lists.james.edwards at gmail.com
>> To: cisco-nsp at puck.nether.net
>> Subject: [c-nsp] ME3600 config help, Q in Q
>>
>> I am trying to configure an interface on a ME3600 to accept Q in Q
>> from a provider. The p-vlan the provider is using is 1048 and they are
>> carrying customer vlans (c-vlan) 1058-1098, one from each site. I'm
>> new to the 3600 and have not done Q in Q on it yet. I've worked up
>> this much of the config but it does not seem right. Can anyone give me
>> some pointers or links to help me along ? I've only got one customer
>> site configed, there will be 14.
>>
>>
>> !
>> vlan 1048
>>  name WINDSTREAM
>> !
>> vlan 1058
>>  name WINDSTREAM-HOBBS
>> !
>> interface GigabitEthernet0/6
>>  description Windstream VLS IP.LVXX.xxxxxx..WCI.001
>>  port-type nni
>>  switchport trunk allowed vlan none
>>  switchport mode trunk
>>  service instance 10 ethernet
>>   encapsulation dot1q 1048
>>   rewrite ingress tag pop 1 symmetric
>>   bridge-domain 10
>>  !
>> !
>> interface Vlan1048
>>  description Windstream VLS
>>  no ip address
>> !
>> interface Vlan1058
>>  description WINDSTREAM-HOBBS
>>  ip address xxx.xx.xx.1 255.255.255.0
>>
>>
>>
>> Thanks,
>>
>> James
>> _______________________________________________
>> cisco-nsp mailing list  cisco-nsp at puck.nether.net
>> https://puck.nether.net/mailman/listinfo/cisco-nsp
>> archive at http://puck.nether.net/pipermail/cisco-nsp/
>