[c-nsp] ME3600 config help, Q in Q

[Darren O'Connor]

What exactly are you trying to do? Looks like you're trying to L3 terminate one of the cvlans, but what are you going to do with the others? what's your end goal?

Thanks
Darren
http://www.mellowd.co.uk/ccie



> Date: Fri, 8 Aug 2014 10:17:11 -0600
> From: lists.james.edwards at gmail.com
> To: cisco-nsp at puck.nether.net
> Subject: [c-nsp] ME3600 config help, Q in Q
> 
> I am trying to configure an interface on a ME3600 to accept Q in Q
> from a provider. The p-vlan the provider is using is 1048 and they are
> carrying customer vlans (c-vlan) 1058-1098, one from each site. I'm
> new to the 3600 and have not done Q in Q on it yet. I've worked up
> this much of the config but it does not seem right. Can anyone give me
> some pointers or links to help me along ? I've only got one customer
> site configed, there will be 14.
> 
> 
> !
> vlan 1048
>  name WINDSTREAM
> !
> vlan 1058
>  name WINDSTREAM-HOBBS
> !
> interface GigabitEthernet0/6
>  description Windstream VLS IP.LVXX.xxxxxx..WCI.001
>  port-type nni
>  switchport trunk allowed vlan none
>  switchport mode trunk
>  service instance 10 ethernet
>   encapsulation dot1q 1048
>   rewrite ingress tag pop 1 symmetric
>   bridge-domain 10
>  !
> !
> interface Vlan1048
>  description Windstream VLS
>  no ip address
> !
> interface Vlan1058
>  description WINDSTREAM-HOBBS
>  ip address xxx.xx.xx.1 255.255.255.0
> 
> 
> 
> Thanks,
> 
> James
> _______________________________________________
> cisco-nsp mailing list  cisco-nsp at puck.nether.net
> https://puck.nether.net/mailman/listinfo/cisco-nsp
> archive at http://puck.nether.net/pipermail/cisco-nsp/