[c-nsp] ASR1001 RAM

[Gustav UHLANDER]

Yepp same here we upgraded our route reflectors to 16gig just a couple if weeks ago. We used hp memory for it. I Will try and get a partnumber for it on monday. :)

Skickas med OWA för iPad
________________________________________
Från: cisco-nsp <cisco-nsp-bounces at puck.nether.net> för Richard Hicks <richard.hicks at gmail.com>
Skickat: den 6 augusti 2014 19:33:15
Till: CiscoNSP List
Kopia: cisco-nsp at puck.nether.net
Ämne: Re: [c-nsp] ASR1001 RAM

We just purchased these 16GB kits for our ASR1001's:

http://www.memoryx.com/masr1k100116gb.html

Haven't had any problems.

The 4GB that come default on the ASR1001's cannot hold a full BGP routing
table.

I tried to get our Cisco Rep and Reseller to recommend "Cisco Approved" RAM
but they would not bite.
Said they were concerned that any non-Cisco branded memory would not be up
to the task.  Hog wash.

$15k list price for 16GB of standard ECC RAM is criminal.


On Tue, Aug 5, 2014 at 7:36 PM, CiscoNSP List <cisconsp_list at hotmail.com>
wrote:

> Hi Guys,
>
> Can anyone please recommend (Non Cisco) ram for the ASR1001's ?
>
> Cheers.
> _______________________________________________
> cisco-nsp mailing list  cisco-nsp at puck.nether.net
> https://puck.nether.net/mailman/listinfo/cisco-nsp
> archive at http://puck.nether.net/pipermail/cisco-nsp/
>
_______________________________________________
cisco-nsp mailing list  cisco-nsp at puck.nether.net
https://puck.nether.net/mailman/listinfo/cisco-nsp
archive at http://puck.nether.net/pipermail/cisco-nsp/