[c-nsp] Sup720 Redundancy Problems

[Tammy Firefly]

On 8/16/14, 20:53:18, Frank Bulk wrote:
> Looks like you got them all on =)
> 
> When you successfully boot the new SUP in a separate chassis is it running
> the exact same software as the production SUP?

Yup exact same image.

> 
> One other article I read suggested changing the mode to RPR
> (http://www.cisco.com/c/en/us/td/docs/ios/12_2sr/release/notes/122SRcavs2.pd
> f) which means:
> conf t
> redundancy
>  mode rpr
> end
Ill give this a try.


 One thing I did notice is the new sup has a 128MB CF card in a flash
adapter on the sup, the other sup has a 64mb flash module.
Would that cause this?

> 
> Frank