[c-nsp] Sup720 Redundancy Problems

Ben Hammadi, Kayssar (NSN - TN/Tunis) kayssar.ben_hammadi at nsn.com
Sun Aug 17 05:35:31 EDT 2014


Hi,

 Try : redundancy config-sync ignore mismatch , then reload the standby

Cdt
Kayssar

> On Aug 17, 2014, at 4:04, "ext Tammy Firefly" <tammy-lists at wiztech.biz> wrote:
> 
> 
>> On 8/16/14, 20:53:18, Frank Bulk wrote:
>> Looks like you got them all on =)
>> 
>> When you successfully boot the new SUP in a separate chassis is it running
>> the exact same software as the production SUP?
> 
> Yup exact same image.
> 
>> 
>> One other article I read suggested changing the mode to RPR
>> (http://www.cisco.com/c/en/us/td/docs/ios/12_2sr/release/notes/122SRcavs2.pd
>> f) which means:
>> conf t
>> redundancy
>> mode rpr
>> end
> Ill give this a try.
> 
> 
> One thing I did notice is the new sup has a 128MB CF card in a flash
> adapter on the sup, the other sup has a 64mb flash module.
> Would that cause this?
> 
>> 
>> Frank
> 
> _______________________________________________
> cisco-nsp mailing list  cisco-nsp at puck.nether.net
> https://puck.nether.net/mailman/listinfo/cisco-nsp
> archive at http://puck.nether.net/pipermail/cisco-nsp/



More information about the cisco-nsp mailing list