[c-nsp] PIM register-source command for IOS XR

[Rimestad, Steinar]

Hi John,

Should be the following:

conf t
router pim
 address-family ipv4
  register-source Loopback0


Or the obligatory oneliner:

router pim address-family ipv4 register-source loopback 0

Regards,
Steinar




On 20/08/14 22:04, "John Neiberger" <jneiberger at gmail.com> wrote:

>I have a use case where I really need to force some ASR9Ks to use their
>loopback addresses as the source for PIM register messages but there
>doesn't seem to be a way to do it. I've checked up to version 5.2 and
>there
>doesn't seem to be a command to do this like there is in IOS.
>
>Do any of you know a way to do this?
>
>Thanks,
>John
>_______________________________________________
>cisco-nsp mailing list  cisco-nsp at puck.nether.net
>https://puck.nether.net/mailman/listinfo/cisco-nsp
>archive at http://puck.nether.net/pipermail/cisco-nsp/