[c-nsp] PIM register-source command for IOS XR

[John Neiberger]

Thanks! For whatever reason, I couldn't find it in the 5.x PIM command
references.

John


On Thu, Aug 21, 2014 at 2:32 AM, Rimestad, Steinar <
Steinar.Rimestad at altibox.no> wrote:

> Hi John,
>
> Should be the following:
>
> conf t
> router pim
>  address-family ipv4
>   register-source Loopback0
>
>
> Or the obligatory oneliner:
>
> router pim address-family ipv4 register-source loopback 0
>
> Regards,
> Steinar
>
>
>
>
> On 20/08/14 22:04, "John Neiberger" <jneiberger at gmail.com> wrote:
>
> >I have a use case where I really need to force some ASR9Ks to use their
> >loopback addresses as the source for PIM register messages but there
> >doesn't seem to be a way to do it. I've checked up to version 5.2 and
> >there
> >doesn't seem to be a command to do this like there is in IOS.
> >
> >Do any of you know a way to do this?
> >
> >Thanks,
> >John
> >_______________________________________________
> >cisco-nsp mailing list  cisco-nsp at puck.nether.net
> >https://puck.nether.net/mailman/listinfo/cisco-nsp
> >archive at http://puck.nether.net/pipermail/cisco-nsp/
>
>