[c-nsp] OMG! ME3600 does not automatically copy DSCP into COS and also does not automatically copy EXP into COS T-T

[PlaWanSai RMUTT CPE IX]

Hi all,

I found the problem my customer's TOS is rewritten.
Topology:
Tester1 (Send CoS=5) -- Gi0/0/1/0 ASR9k 0/0/1/0.3604 -- xconnect --- Gi0/9
ME-3600X Gi0/24 -- Gi0/14 ME-3400 Gi0/5 -- Tester2 (rx CoS=0)

I open the TAC both ASR and ME Switch Team and this is the answer from ME
Switch Team:

ME3600 does not automatically copy DSCP into COS and also does not
automatically copy EXP into COS as described in the following document which
was presented on Cisco Live event (page 44 and 45):
http://d2zmdbbm9feqrf.cloudfront.net/2012/usa/pdf/BRKSPG-2209.pdf

Solution:
Please configure policy-map on interfaces to set a proper COS value basing
on incoming DSCP.

I bought ME-3600 about 100 for use as PE. T-T

Thank you very much.