[c-nsp] VPLS on GSR12k

Arie Vayner (avayner) avayner at cisco.com
Mon Feb 24 00:06:05 EST 2014


VPLS should be support on GSR 12K routers with SIP-600 (engine 5...) It should actually have somewhat less restrictions than the engine 3 ISE modules...

I do think (it has been a long time since I had to really touch it) that you need to run IOS-XR for that.

Check this configuration guide for some details (there might be newer one available...):


-----Original Message-----
From: cisco-nsp [mailto:cisco-nsp-bounces at puck.nether.net] On Behalf Of Robert Hass
Sent: Thursday, February 20, 2014 12:27
To: cisco-nsp at puck.nether.net
Subject: [c-nsp] VPLS on GSR12k

I have question regarding linecards which supports VPLS.

Here is only one linecard (ISE 4x1G) supported as edge side for VPLS:

Can I have edge side on SIP+SPA ?
My GSR is only equipped with SIP-600 and SPA cards

cisco-nsp mailing list  cisco-nsp at puck.nether.net https://puck.nether.net/mailman/listinfo/cisco-nsp
archive at http://puck.nether.net/pipermail/cisco-nsp/

More information about the cisco-nsp mailing list