[c-nsp] output rate-limiting ME-3600X

[Eric Louie]

Thanks, Pshem.  I'll try it on 15.2(4) and see if it works.

much appreciated,
Eric Louie


> -----Original Message-----
> From: Pshem Kowalczyk [mailto:pshem.k at gmail.com]
> Sent: Monday, February 24, 2014 4:45 PM
> To: Eric Louie
> Cc: cisco-nsp at puck.nether.net
> Subject: Re: [c-nsp] output rate-limiting ME-3600X
> 
> Hi,
> 
> We do it regularly and for all interfaces:
> 
> policy-map PM-INT-100M-OUT
>  class class-default
>   shape average 100000000
> 
> 
> interface GigabitEthernet0/2
>  switchport trunk allowed vlan none
>  switchport mode trunk
>  service-policy output PM-INT-100M-OUT
> 
> We'd generally have a service-instance rate-limit under that as well:
> 
>  service instance 331 ethernet
>   encapsulation dot1q 331
>   l2protocol forward
>   service-policy input PM-CUST-DEFAULT-50M-AF-IN
>   service-policy output PM-CUST-DEFAULT-50M-OUT
>   xconnect 10.123.111.1 271331 encapsulation mpls
> 
> policy-map PM-CUST-DEFAULT-50M-OUT
>  description limiting to 50 Mbps
>  class CM-DUMMY
>  class class-default
>   shape average 50000000
>   queue-limit percent 100
> 
> (CM-DUMMY is there to allow for a queue-limit with only class-default).
> 
> 
> This is on 15.3(2)S.
> 
> kind regards
> Pshem
> 
> 
> On 25 February 2014 11:05, Eric Louie <elouie at yahoo.com> wrote:
> > I'm at an impasse trying to get this to work.  Does anyone have any
> > examples of setting output rate limiting on a physical interface?
> >
> > Am I running into an IOS feature issue?
> >
> > lab-kma-sd-base1# sh ver
> > Cisco IOS Software, ME360x Software (ME360x-UNIVERSALK9-M), Version
> > 15.2(4)S, RELEASE SOFTWARE (fc1)
> >
> > much appreciated,
> > Eric Louie
> >
> > _______________________________________________
> > cisco-nsp mailing list  cisco-nsp at puck.nether.net
> > https://puck.nether.net/mailman/listinfo/cisco-nsp
> > archive at http://puck.nether.net/pipermail/cisco-nsp/