[c-nsp] DHCPv6

[Nick Hilliard]

On 04/01/2014 22:13, M K wrote:
> HiYes , It's clear for me now , can you provide how to set the managed
> bit in the RA messages?

int Foo1/1
 ipv6 nd managed-config-flag
 ipv6 nd other-config-flag

On 04/01/2014 22:18, Jeyamurali Sivapathasundaram wrote:
> RA is enabled by default unless you configure
> IPV6 ND RA suppress

You can't do that because there is no option in dhcpv6 to provide a default
route.  So in order to use DHCPv6, you need to leave RA enabled to provide
default route only, then set the M+O flags in RA packets to hand over to
DHCPv6, then turn off absolutely everything else in RA including stuff
which is enabled by default like prefix announcements.

Nick