[c-nsp] Cisco UCS C220

[Aaron]

Install a SD disk. 16 GB is sufficient. then you can install ESXi on that.
I have done it on both 5.1 and 5.5.
Also might help to get the cisco OEM version of ESXi from Vmware.


On Sun, Jan 12, 2014 at 9:54 PM, PerseusDK <perseusdk at gmail.com> wrote:

> Software RAID is not supported with ESXi.
>
> This is also stated in the manuals.
>
> /Lars
>
> Sendt fra min iPhone
>
> > Den 12/01/2014 kl. 16.04 skrev Olivier CALVANO <o.calvano at gmail.com>:
> >
> > Hi
> >
> > i know that it's not a router, but i am search a solution at a small
> > cisco UCS C220 Problems, if anyone can help me.
> >
> > We have a cisco UCS C220 M3 in lab, with only 1 SSD drive and
> > LSI Soft Megaraid integred.
> >
> > I can install VMWare Esxi on, he detect the hard drive, but after i don't
> > have
> > a "HDD" choice in boot order. it's normal ?
> >
> > i don't see where i can boot on the SSD drive
> >
> > best regards
> > Olivier
> > _______________________________________________
> > cisco-nsp mailing list  cisco-nsp at puck.nether.net
> > https://puck.nether.net/mailman/listinfo/cisco-nsp
> > archive at http://puck.nether.net/pipermail/cisco-nsp/
> _______________________________________________
> cisco-nsp mailing list  cisco-nsp at puck.nether.net
> https://puck.nether.net/mailman/listinfo/cisco-nsp
> archive at http://puck.nether.net/pipermail/cisco-nsp/
>