[c-nsp] ARP problems with UCS FI 6140XP

[Chuck Church]

Not really sure what an 'FI' is, but can you set the mac address aging time
on this FI to something longer than 5 minutes, and or have the netflow
collector do 'something' to send traffic, like configure NTP on it?

Chuck

-----Original Message-----
From: cisco-nsp [mailto:cisco-nsp-bounces at puck.nether.net] On Behalf Of Joe
Loiacono
Sent: Friday, January 17, 2014 9:38 AM
To: cisco-nsp at puck.nether.net
Subject: [c-nsp] ARP problems with UCS FI 6140XP

I have a host that is receiving netflow UDP exports. A couple times a day
the export flow stops. The MAC address is getting dropped from the FI MAC
address table. A simple HTTP access to the host restores the MAC address and
the flow.

It looks like CIMC logging is for "system events" only. Is there a way I can
debug or log *network* messages (e.g., ARP, etc.)

Thanks,

Joe Loiacono
_______________________________________________
cisco-nsp mailing list  cisco-nsp at puck.nether.net
https://puck.nether.net/mailman/listinfo/cisco-nsp
archive at http://puck.nether.net/pipermail/cisco-nsp/