[c-nsp] Search small replacement for Cisco 12k with ATM/OC3 interface

[Sigurbjörn Birkir Lárusson]

There is a warning on boot up that the router might explode and spread its
ashes into space (or similar).

Assuming you have enough ram there is no particular reason why the
software wouldn¹t load

Kind regards,
Sibbi

On 20.1.2014 15:52, "Mikael Abrahamsson" <swmike at swm.pp.se> wrote:

>On Mon, 20 Jan 2014, Gert Doering wrote:
>
>> It is still supported?  Oh, thanks for that info.  I thought NPE400 was
>> also EOL already, and end of software support - good to know (and
>> end-of-life announcements for the NPE-G1 have been sent).
>
>Hm, I dug up the EoL announcement, and indeed it's end-of-software
>development in sep 2011. However, hardware support is available until Sep
>2015.
>
>Also, they are still releasing images (probably because NPE-G1 runs same
>code). 15.2M and 15.2S seems to be the last images made for it. Last
>image 
>available is from september 2013 anyway.
>
>-- 
>Mikael Abrahamsson    email: swmike at swm.pp.se
>_______________________________________________
>cisco-nsp mailing list  cisco-nsp at puck.nether.net
>https://puck.nether.net/mailman/listinfo/cisco-nsp
>archive at http://puck.nether.net/pipermail/cisco-nsp/