[c-nsp] Cisco 3750G-48TS-E IOS issue

[Renelson Panosky]

We  accidently pushed the wrong IOS in this switch.  How can we assign IP
address to it in Rommon mode.  from switch:

here is what we see this switch on:

File "flash:/c3750e-universalk9-mz.122-53.SE1.bin" uncompressed and
installed, entry point: 0x3000

executing...



Error: hardware not supported by firmware.

       Try loading newer software instead.

       System Resetting...

Base ethernet MAC Address: 00:1e:bd:10:ef:80

Xmodem file system is available.

The password-recovery mechanism is enabled.

Initializing Flash...

flashfs[0]: 502 files, 7 directories

flashfs[0]: 0 orphaned files, 0 orphaned directories

flashfs[0]: Total bytes: 32514048

flashfs[0]: Bytes used: 24845312

flashfs[0]: Bytes available: 7668736

flashfs[0]: flashfs fsck took 22 seconds.

...done Initializing Flash.

Boot Sector Filesystem (bs) installed, fsid: 3

done.

Loading
"c3750e-universalk9-mz.122-53.SE1.bin"...c3750e-universalk9-mz.122-53.SE1.bin:
no such device



Error loading "c3750e-universalk9-mz.122-53.SE1.bin"



Interrupt within 5 seconds to abort boot process.

Loading "flash:/c3750e-universalk9-mz.122-53.SE1.bin".



Please help..