[c-nsp] Cisco 3750G-48TS-E IOS issue

[Panocisco77]

Thank you guys.  I was really hoping there is another way because I really did not want to do Xmodem. I guest Xmodem it is..

> On Jan 20, 2014, at 8:33 PM, Blake Dunlap <ikiris at gmail.com> wrote:
> 
> Also, in the future I suggest using the archive commands, and not manually
> loading code. They have protections against this sort of thing.
> 
> -Blake
>> On Jan 20, 2014 6:05 PM, "Jeremy Bresley" <brez at brezworks.com> wrote:
>> 
>>> On 1/20/2014 5:58 PM, Renelson Panosky wrote:
>>> 
>>> We  accidently pushed the wrong IOS in this switch.  How can we assign IP
>>> address to it in Rommon mode.  from switch:
>>> 
>>> here is what we see this switch on:
>>> 
>>> File "flash:/c3750e-universalk9-mz.122-53.SE1.bin" uncompressed and
>>> installed, entry point: 0x3000
>>> 
>>> 
>>> You don't.
>> 
>> http://www.cisco.com/en/US/products/hw/switches/ps628/products_tech_
>> note09186a0080169696.shtml
>> 
>> Xmodem time...  I would suggest setting your console speed to as fast as
>> possible, and using the oldest image you can find on CCO to get it back
>> online as the old 12.2(35)SE images tend to be quite a bit smaller than the
>> 12.2(55)SE or 15.0(2)SE images.  Plan on it taking at least an hour for the
>> download.
>> 
>> Jeremy "TheBrez" Bresley
>> brez at brezworks.com
>> _______________________________________________
>> cisco-nsp mailing list  cisco-nsp at puck.nether.net
>> https://puck.nether.net/mailman/listinfo/cisco-nsp
>> archive at http://puck.nether.net/pipermail/cisco-nsp/
> _______________________________________________
> cisco-nsp mailing list  cisco-nsp at puck.nether.net
> https://puck.nether.net/mailman/listinfo/cisco-nsp
> archive at http://puck.nether.net/pipermail/cisco-nsp/