[c-nsp] Cisco 3750G-48TS-E IOS issue

[Blake Dunlap]

Also, in the future I suggest using the archive commands, and not manually
loading code. They have protections against this sort of thing.

-Blake
On Jan 20, 2014 6:05 PM, "Jeremy Bresley" <brez at brezworks.com> wrote:

> On 1/20/2014 5:58 PM, Renelson Panosky wrote:
>
>> We  accidently pushed the wrong IOS in this switch.  How can we assign IP
>> address to it in Rommon mode.  from switch:
>>
>> here is what we see this switch on:
>>
>> File "flash:/c3750e-universalk9-mz.122-53.SE1.bin" uncompressed and
>> installed, entry point: 0x3000
>>
>>
>>  You don't.
>
> http://www.cisco.com/en/US/products/hw/switches/ps628/products_tech_
> note09186a0080169696.shtml
>
> Xmodem time...  I would suggest setting your console speed to as fast as
> possible, and using the oldest image you can find on CCO to get it back
> online as the old 12.2(35)SE images tend to be quite a bit smaller than the
> 12.2(55)SE or 15.0(2)SE images.  Plan on it taking at least an hour for the
> download.
>
> Jeremy "TheBrez" Bresley
> brez at brezworks.com
> _______________________________________________
> cisco-nsp mailing list  cisco-nsp at puck.nether.net
> https://puck.nether.net/mailman/listinfo/cisco-nsp
> archive at http://puck.nether.net/pipermail/cisco-nsp/
>