[c-nsp] ME3600X: VPLS Attachment Circuit Resiliency options

[Arie Vayner (avayner)]

Andrea,

You may want to start here:
http://www.cisco.com/en/US/partner/docs/switches/metro/me3600x_3800x/software/release/15.4_1_S/configuration/guide/swevc.html#wp1044168

HTH
Arie

-----Original Message-----
From: cisco-nsp [mailto:cisco-nsp-bounces at puck.nether.net] On Behalf Of Pasquino Andrea
Sent: Tuesday, January 21, 2014 09:12
To: cisco-nsp at puck.nether.net
Subject: [c-nsp] ME3600X: VPLS Attachment Circuit Resiliency options

Hello,

We have three sites: in each site two Customer Switches are attached to two ME3600x PE. 
The service between the three sites must be Layer2, and we don't want to mix L2protocols between PEs and customer switches.

I know there are some solutions for 7600 (relay BPDU through dedicated PW, MC-LAG, etc...).
Are there solutions now or in roadmap for ME3600x/ME3800X ?

Best Regards

Andrea



_______________________________________________
cisco-nsp mailing list  cisco-nsp at puck.nether.net https://puck.nether.net/mailman/listinfo/cisco-nsp
archive at http://puck.nether.net/pipermail/cisco-nsp/