[c-nsp] ME3600X: VPLS Attachment Circuit Resiliency options

[Adam Vitkovsky]

Hello Andrea,

Looking at the config guides REP and ERP are the two options: 
http://www.cisco.com/en/US/docs/switches/metro/me3600x_3800x/software/releas
e/15.3_3_S/configuration/guide/swrep.html
http://www.cisco.com/en/US/docs/switches/metro/me3600x_3800x/software/releas
e/15.3_3_S/configuration/guide/swering_prot.html

However the documentation to ERP configuration is broken.


adam
-----Original Message-----
From: cisco-nsp [mailto:cisco-nsp-bounces at puck.nether.net] On Behalf Of
Pasquino Andrea
Sent: Tuesday, January 21, 2014 6:12 PM
To: cisco-nsp at puck.nether.net
Subject: [c-nsp] ME3600X: VPLS Attachment Circuit Resiliency options

Hello,

We have three sites: in each site two Customer Switches are attached to two
ME3600x PE. 
The service between the three sites must be Layer2, and we don't want to mix
L2protocols between PEs and customer switches.

I know there are some solutions for 7600 (relay BPDU through dedicated PW,
MC-LAG, etc...).
Are there solutions now or in roadmap for ME3600x/ME3800X ?

Best Regards

Andrea



_______________________________________________
cisco-nsp mailing list  cisco-nsp at puck.nether.net
https://puck.nether.net/mailman/listinfo/cisco-nsp
archive at http://puck.nether.net/pipermail/cisco-nsp/