[c-nsp] I need to limit BW ASR9K

Wed Jul 2 11:24:23 EDT 2014

When you do a "show bundle-ether 2" this is  the output. Thanks.

#sh interfaces bundle-ether 2
Wed Jul  2 09:50:33.419 gmt
Bundle-Ether2 is up, line protocol is up
   Interface state transitions: 3
   MTU 9216 bytes, BW 2000000 Kbit (Max: 2000000 Kbit)
      reliability 255/255, txload 11/255, rxload 84/255
   Encapsulation ARPA,
   Full-duplex, 2000Mb/s
     No. of members in this bundle: 2
         GigabitEthernet0/0/0/4 Full-duplex      1000Mb/s Active
         GigabitEthernet0/0/0/5 Full-duplex      1000Mb/s Active

El 02/07/14 09:46, Scott Miller escribió:
> When you do a "show bundle-ether 2" does the output say both members 
> are in an "active" state?
>
> RP/0/RSP0/CPU0:IOS-XR-2#show int bundle-ether 2
> ..
> ..
>     No. of members in this bundle: 2
>       GigabitEthernet0/0/0/1       Full-duplex  1000Mb/s   Active
>       GigabitEthernet0/1/0/1       Full-duplex  1000Mb/s   Standby
>
> In LACP mode, one is active, the other is standby, so the total 
> bandwidth available is only 1gig.
>
> Maybe convert it to an EtherChannel?