[c-nsp] Cisco 7600 pseudowire ping

[Peter Persson]

Do you have any Control-plane policing?
As i understand your email, you are pinging between two 7600's directly and
not anything behind it?




2014-07-19 13:47 GMT+02:00 Ivan <cisco-nsp at itpro.co.nz>:

> I have found that mpls pseudowire pings to some 7600s running 15.2(4)S4a
> go missing - I see about 95/100 success rate.  On other devices with older
> software I have no loss.  The problem is not seen if the ping interval is
> increased to 100ms.  Also pinging over the VC shows no loss.
>
> Given the above I suspect some rate-limiting may be taking place.  I am
> hoping someone will be able to confirm and ideally share some commands that
> show come counters for the drops as so far I have had no success.
>
> c7600s72033-advipservicesk9-mz.152-4.S4a.bin
> WS-X6704-10GE
> WS-SUP720-3BXL
>
> Thanks
>
> Ivan
> _______________________________________________
> cisco-nsp mailing list  cisco-nsp at puck.nether.net
> https://puck.nether.net/mailman/listinfo/cisco-nsp
> archive at http://puck.nether.net/pipermail/cisco-nsp/
>