[c-nsp] ISIS IOS and IOS XR

[Mohammad Khalil]

you are the man , thanks

BR,


> From: oboehmer at cisco.com
> To: gunner_200 at live.com; cisco-nsp at puck.nether.net
> Date: Tue, 3 Jun 2014 09:17:33 +0000
> Subject: Re: [c-nsp] ISIS IOS and IOS XR
> 
> 
> 
> -----Original Message-----
> From: M K <gunner_200 at live.com>
> Date: Tuesday, 3 June 2014 11:03
> To: "cisco-nsp at puck.nether.net" <cisco-nsp at puck.nether.net>
> Subject: [c-nsp] ISIS IOS and IOS XR
> 
> >Hi all
> >I am having issue establishing ISIS between IOS and IOS XR
> >IOS
> >R1#sh run int lo0 | inc ipv6
> > ipv6 address 2001::1/128
> > ipv6 router isis 1
> >R1#sh run int fas1/0 | inc ipv6
> > ipv6 address 2001:192:102::1/64
> > ipv6 router isis 1
> >
> >router isis 1
> > net 49.0001.0000.0000.0001.00
> > is-type level-2-only
> > metric-style wide
> >
> >IOS XR
> >RP/0/0/CPU0:XR1#sh run router isis
> >Tue Jun  3 12:00:23.223 UTC
> >router isis 1
> > is-type level-2-only
> > net 49.0001.0000.0000.0010.00
> > interface Loopback0
> >  address-family ipv4 unicast
> >
> >  address-family ipv6 unicast
> >
> > interface GigabitEthernet0/0/0/0
> >  address-family ipv4 unicast
> >
> >  address-family ipv6 unicast
> >
> >I tried without the metric-style wide on the IOS and the same , as well ,
> >I have configured on the IOS address-family ipv6 unicast under the router
> >isis 1 process and the same , what am missing?
> 
> Please enable 
> 
> router isis 1
>  metric-style wide
>  address-family ipv6 unicast
>   multi-topology
> 
> IOS-XR defaults to multi-topoloy when multiple AFs are used, but you need
> to enable it in IOS..
> 
> 	oli
> 
> 
> 
> _______________________________________________
> cisco-nsp mailing list  cisco-nsp at puck.nether.net
> https://puck.nether.net/mailman/listinfo/cisco-nsp
> archive at http://puck.nether.net/pipermail/cisco-nsp/