[c-nsp] ISIS IOS and IOS XR

[Oliver Boehmer (oboehmer)]

-----Original Message-----
From: M K <gunner_200 at live.com>
Date: Tuesday, 3 June 2014 11:03
To: "cisco-nsp at puck.nether.net" <cisco-nsp at puck.nether.net>
Subject: [c-nsp] ISIS IOS and IOS XR

>Hi all
>I am having issue establishing ISIS between IOS and IOS XR
>IOS
>R1#sh run int lo0 | inc ipv6
> ipv6 address 2001::1/128
> ipv6 router isis 1
>R1#sh run int fas1/0 | inc ipv6
> ipv6 address 2001:192:102::1/64
> ipv6 router isis 1
>
>router isis 1
> net 49.0001.0000.0000.0001.00
> is-type level-2-only
> metric-style wide
>
>IOS XR
>RP/0/0/CPU0:XR1#sh run router isis
>Tue Jun  3 12:00:23.223 UTC
>router isis 1
> is-type level-2-only
> net 49.0001.0000.0000.0010.00
> interface Loopback0
>  address-family ipv4 unicast
>
>  address-family ipv6 unicast
>
> interface GigabitEthernet0/0/0/0
>  address-family ipv4 unicast
>
>  address-family ipv6 unicast
>
>I tried without the metric-style wide on the IOS and the same , as well ,
>I have configured on the IOS address-family ipv6 unicast under the router
>isis 1 process and the same , what am missing?

Please enable 

router isis 1
 metric-style wide
 address-family ipv6 unicast
  multi-topology

IOS-XR defaults to multi-topoloy when multiple AFs are used, but you need
to enable it in IOS..

	oli