[c-nsp] 2960S flex stack issue

naresh reddy nareshbtech at yahoo.com
Wed Jun 11 07:05:11 EDT 2014


Hello everyone

from the past few hours I am stuck with trouble shooting flex stack on 2960

i have two Ws-c2960s-24ts-l running c2960s-universalk9-mz.150-2.SE5 with flex stack module
i have a flex stack cable given in the box labeled as Leoni

the flex stack module is discovered
and i have cleared the configs and patches the modules and powered both  of them

the flex stack ports stays down all the time
the boot log as follows

  Mar 30 01:29:43.839: %SYS-5-CONFIG_I: Configured from memory by console
Mar 30 01:29:43.960: %STACKMGR-5-SWITCH_READY: Switch 1 is READY
Mar 30 01:29:43.965: %STACKMGR-4-STACK_LINK_CHANGE: Stack Port 1 Switch 1 has changed to state DOWN
Mar 30 01:29:43.965: %STACKMGR-4-STACK_LINK_CHANGE: Stack Port 2 Switch 1 has changed to state DOWN
Mar 30 01:29:44.426: %PLATFORM-6-FLEXSTACK_INSERTED: FlexStack module inserted in Switch 1.
Mar 30 01:29:44.573: %STACKMGR-5-MASTER_READY: Master Switch 1 is READY
  Switch #    Port 1       Port 2
  --------    ------       ------
    1          Down         Down
Please suggest


More information about the cisco-nsp mailing list