[c-nsp] shaper in policy-map is not taken into account

[Martin T]

Hi,

I have configured 20Mbps shaper("shape average 20000000") in
SHAPER-EGRESS-TRAFFIC policy-map under class-default traffic class:

  Service-policy output: SHAPER-EGRESS-TRAFFIC

    Class-map: class-default (match-any)
      306585 packets, 88611267 bytes
      30 second offered rate 2107000 bps, drop rate 17000 bps
      Match: any
      Traffic Shaping
           Target/Average   Byte   Sustain   Excess    Interval  Increment
             Rate           Limit  bits/int  bits/int  (ms)      (bytes)
         20000000/20000000  125000 500000    500000    25        62500

        Adapt  Queue     Packets   Bytes     Packets   Bytes     Shaping
        Active Depth                         Delayed   Delayed   Active
        -      0         306384    88306481  6992      9487573   no

      Service-policy : VOIP-EGRESS-TRAFFIC-POLICY

        Class-map: VOIP-EGRESS-TRAFFIC-CLASS (match-all)
          0 packets, 0 bytes
          30 second offered rate 0 bps, drop rate 0 bps
          Match: access-group name VOIP-EGRESS-TRAFFIC-ACL
          Queueing
            Strict Priority
            Output Queue: Conversation 264
            Bandwidth 4500 (kbps) Burst 112500 (Bytes)
            (pkts matched/bytes matched) 0/0
            (total drops/bytes drops) 0/0

        Class-map: class-default (match-any)
          306585 packets, 88611267 bytes
          30 second offered rate 2107000 bps, drop rate 17000 bps
          Match: any


During the last 30 seconds, policy-map has allowed traffic at 2.1Mbps
in average and dropped 17kbps in average. Why is my policy-map
dropping traffic while it should shape it? And shaping is configured
to 20Mbps not around 2Mbps..



regards,
Martin