[c-nsp] X6708-10G-3C compatible with 7604 chassis?

Thu Mar 20 16:23:46 EDT 2014

Here you go:

xxxxxxx#sh module
Mod Ports Card Type Model              Serial No.
--- ----- -------------------------------------- ------------------ 
-----------
   1    5  Route Switch Processor 720 10GE (Activ RSP720-3CXL-10GE   
JAE1436024O
   2    8  CEF720 8 port 10GE with DFC WS-X6708-10GE      SAL1515B29K
   3   24  CEF720 24 port 1000mb SFP WS-X6724-SFP       SAD095100MX

Mod MAC addresses                       Hw    Fw Sw           Status
--- ---------------------------------- ------ ------------ ------------ 
-------
   1  0023.eb0e.af70 to 0023.eb0e.af77   2.2   12.2(33r)SRD 12.2(33)SRE5 Ok
   2  e05f.b974.c5e8 to e05f.b974.c5ef   2.3   Unknown Unknown      PwrDown
   3  0015.6215.25a4 to 0015.6215.25bb   2.3   12.2(14r)S5 12.2(33)SRE5 Ok

Mod  Sub-Module                  Model              Serial Hw     Status
---- --------------------------- ------------------ ----------- ------- 
-------
   1  Policy Feature Card 3       7600-PFC3CXL-10GE  JAE14360195 1.2    Ok
   1  C7600 MSFC4 Daughterboard   7600-MSFC4         JAE1436018L 2.2    Ok
   2  Distributed Forwarding Card WS-F6700-DFC3C     SAL15129JJT 1.4    
PwrDown
   3  Centralized Forwarding Card WS-F6700-CFC       SAD094502FU 2.0    Ok

Mod  Online Diag Status
---- -------------------
   1  Pass
   2  Not Applicable
   3  Pass
xxxxxxx#sh power
system power redundancy mode = combined
system power total =     2198.70 Watts (52.35 Amps @ 42V)
system power used =       958.02 Watts (22.81 Amps @ 42V)
system power available = 1240.68 Watts (29.54 Amps @ 42V)
                         Power-Capacity PS-Fan Output Oper
PS   Type               Watts   A @42V Status Status State
---- ------------------ ------- ------ ------ ------ -----
1    PWR-2700-AC/4      1319.22 31.41  OK     OK     on
2    PWR-2700-AC/4      1319.22 31.41  OK     OK     on
                         Pwr-Allocated  Oper
Fan  Type               Watts   A @42V State
---- ------------------ ------- ------ -----
1                         76.86  1.83  OK
                         Pwr-Requested  Pwr-Allocated  Admin Oper
Slot Card-Type          Watts   A @42V Watts   A @42V State State
---- ------------------ ------- ------ ------- ------ ----- -----
1    RSP720-3CXL-10GE    378.00  9.00   378.00  9.00  on    on
2    WS-X6708-10GE       444.36 10.58   378.00  9.00  on    off (insuff 
cooling capacity)
3    WS-X6724-SFP        125.16  2.98   125.16  2.98  on    on
xxxxxxx#
xxxxxxx#sh environment
environmental alarms:
system minor alarm on operating fan count (raised 2d02h ago)

backplane:
   operating clock count: 2

fan-tray 1:
   fan-tray 1 type:
   fan-tray 1 fan-fail: OK
clock 1:
   clock 1 OK: OK, clock 1 clock-inuse: in-use
clock 2:
   clock 2 OK: OK, clock 2 clock-inuse: not-in-use
power-supply 1:
   power-supply 1 fan-fail: OK
   power-supply 1 power-input: AC 110V
   power-supply 1 power-output-mode: low
   power-supply 1 incompatible with fan: OK
   power-supply 1 power-output-fail: OK
power-supply 2:
   power-supply 2 fan-fail: OK
   power-supply 2 power-input: AC 110V
   power-supply 2 power-output-mode: low
   power-supply 2 incompatible with fan: OK
   power-supply 2 power-output-fail: OK
module 1:
   module 1 power-output-fail: OK
   module 1 outlet temperature: 34C
   module 1 inlet temperature: 24C
   module 1 device-1 temperature: 29C
   module 1 device-2 temperature: 32C
   module 1 asic-1 (SSA-2) temp: 53C
   module 1 asic-3 temperature: 36C
   module 1 asic-4 temperature: 48C
   module 1 RP outlet temperature: 33C
   module 1 RP inlet temperature: 29C
   module 1 EARL outlet temperature: 30C
   module 1 EARL inlet temperature: 24C
module 3:
   module 3 power-output-fail: OK
   module 3 outlet temperature: 30C
   module 3 inlet temperature: 22C
   module 3 device-1 temperature: 22C
   module 3 device-2 temperature: 26C

chassis connector rating: 2016.00 Watts (48.00 Amps @ 42V)
module 1
   module 1 connector rating: 1260.00 Watts (30.00 Amps @ 42V)
   module 1 power consumption: 378.00 Watts ( 9.00 Amps @ 42V)
module 2
   module 2 connector rating: 2016.00 Watts (48.00 Amps @ 42V)
   module 2 power consumption: 444.36 Watts (10.58 Amps @ 42V)
module 3
   module 3 connector rating: 2016.00 Watts (48.00 Amps @ 42V)
   module 3 power consumption: 125.16 Watts ( 2.98 Amps @ 42V)

chassis per slot cooling capacity: 70 cfm
ambient temperature: < 55C
   module 1 cooling requirement: 35 cfm
   module 2 cooling requirement: 84 cfm
   module 3 cooling requirement: 70 cfm

On 3/20/2014 4:07 PM, Justin wrote:
> Could we get a show power and show environment output?
>
>
> On Thu, Mar 20, 2014 at 3:44 PM, Lobo <lobotiger at gmail.com 
> <mailto:lobotiger at gmail.com>> wrote:
>
>     Hey everyone.  Looking for some assistance or if anyone has had
>     any experience with the WS-X6708-10G-3C line card.  We're trying
>     to use this particular card in our 7604 chassis which has the
>     RSP720-3CXL-10GE processor and 2700W DC power supply.  However, we
>     get errors and the card does not get power to it and in other
>     cases it says there is not enough cooling for it.  Should this
>     card work in this particular setup?  The only other card we have
>     in the chassis is the X6724-SFP which is functioning fine.
>
>     Thanks.
>
>     Jose
>
>
>     _______________________________________________
>     cisco-nsp mailing list cisco-nsp at puck.nether.net
>     <mailto:cisco-nsp at puck.nether.net>
>     https://puck.nether.net/mailman/listinfo/cisco-nsp
>     archive at http://puck.nether.net/pipermail/cisco-nsp/
>
>